Features and sizes
easynightTM black blackout material is silvered on one side for better light and heat reflection.
Lightweight, this fabric weighs 170g per square metre
Easily cut to size with scissors, if you wish, or it can be kept large to fit different size windows.
Now available in 4 sizes:
Regular: 1.5m x 1.45m, includes 8x self-adhesive wide loop strips and 8x strong suction cups
Large: 2m x 1.45m, includes 10x self-adhesive wide loop strips and 10x strong suction cups
Extra Large: 2.3m x 1.45m, includes 10x self-adhesive wide loop strips and 10x strong suction cups
XX Large: 3m x 1.45, includes 20x loop strips, 20x hook discs and 16x suction cups
This Portable pack has velcro adhesive pads to stick to blind and your window at home and Suction cups to transport your blind anywhere and stick to any window. Easynight(TM) can also be used with 3M Command(TM) Strips, not included, on the window frame.
Includes self-adhesive hook discs which can be used on upvc window frames. These can be used instead of, or in addition to, the suction cups. These are ideal for more permanent use, for example at home or wherever the blind will be used regularly.
Here is some important info to read prior to putting the blinds up:
- The window frame must be completely clean and dry. Some cleaning products can leave a residue behind so we recommend rinsing the frame with water after cleaning, and allowing it to dry completely.
- Its important to place the strip correctly the first time, as removing and re-positioning weakens the adhesive. I also found placing the velcro pads higher and closer to the edge of the blind than the photograph shows on the instruction booklet made a firmer grip so the blind could not flop over and let light sneak in. For additional protection against peeping light you can use the 3M Command strips (not included) and place these strips in the corners of the windowsill as shown in the photographs.
- Please use all suction cups and pads evenly to distribute the weight of the blind. When placing the sticky pads on the blinds, press firmly and leave 24 hours so the special fibre can adhere to the blind.
How it works:
Apply your suction cups to the window glass (or apply 3M Command(TM) Strips to the window if you have purchased them for use on the frame).
Apply the wide loop strips (included in the pack) to the easynight(TM) fabric to correspond with the attachments you have placed on the window.
Once the pads have been set in place to the blind for 24 hours you can then use your easynight blind . Simply put up and take down your blackout as and when required!